Freenet Antennas

BulletGrid M2 24 dBi 36 dBm 802.11b/g/n
[BGM2-24]

$302.00
incl. GST

Click to enlarge

Australian companies have the GST refunded by the ATO. The ex-GST price of this product is $274.55

Why Ubiquiti?

Ubiquiti products are carrier-class, meaning they are ideal for:

Wireless ISPs (WISPs),
Companies needing to deploy robust equipment with very powerful network management features, or
End users needing top performance gear.

All Ubiquiti products include:

An Operating System. For most products the OS is AirOS™ - Ubiquiti's powerful operating system and Graphic User Interface (GUI). For some of the embedded systems (boards) the OS is OpenWRT.
Two Network modes that apply between the wired (ethernet) and wireless interfaces:
- Router - with common internet gateway features like NAT Firewall, PPPoE, etc.
- Bridge - transparent bridging.
Four Wireless modes that apply to the radio interface:
- AP. Access Point mode is a standard 802.11 Access Point.
- Station. Sometimes called 'Client' mode, this connects to an AP.
- AP WDS. (AP + MULTI-POINT BRIDGE). This mode is the combination of an AP and a Multi-Point Bridge with up to 6 WDS transparent bridge connections.
- Station WDS. (SINGLE POINT BRIDGE) This mode makes a transparent bridge connection to a unit in AP WDS mode as one of the 6 WDS peers.
Advanced Featutres like:
- Wireless Traffic Shaping. Dedicated upstream and downstream bandwidth control.
- QoS. Wi-Fi Multimedia (WMM) Quality of Service prioritisation for Voice and Video.

See our Product Selection Guides to help you decide which product is best for you.

With this product you get:

1 x 24 dBi, 2.4 GHz grid antenna
1 x Ubiquiti BulletM2-HP
1 x Ubiquiti 15V POE Injector
1 x small roll of Conforming tape to weatherproof the Bullet-Antenna connection.

The Bullet™ screws onto the antenna cable. Picture for illustration only
Click image to enlarge	No radio card / host board issues No antenna cable quality concerns No mechanical stability concerns No enclosure mounting requirement 100 Mbps TCP/IP [?]

High Gain antenna, giving excellent long-distance performance
External signal strength LED meter for antenna alignment
Robust weatherproof design
AirOS V5™ with airMAX™ operating system that includes
- powerful network management
- gateway router or bridge functions, and
- full device control
Two modes of operation:
- WiFi giving 802.11b/g/n compatibility, or
- AirMax™ technology, which is a TDMA technology giving robust network scalability needed for Wireless ISP installations.

airMAX™ is Ubiquiti technology giving true Carrier Class Network Performance.

Antenna gain	24 dBi
Antenna polarisation	Horizontal or Vertical
Antenna mounting	Pole mount included with Azimuth and Elevation adjustment
Transmit power	600 mW max. Note. The max. legal TX power in Australia under the ACMA Class License with this antenna is 12 dBm/16 mW.
Receiver sensitivity	down to -96 dBm
Wireless standards	802.11b/g/n
OS	AirOS 5™ with airMAX™
Processor Specs	Atheros MIPS 24KC, 400MHz
Memory Information	32MB SDRAM, 8MB Flash
Networking Interface	1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Approvals	FCC Part 15.247, IC RS210, C-Tick
RoHS Compliance	Yes
Power Supply	12-24V POE @ 4 Watts. 15 V POE injector included.
Power Method	Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Operating Temperature	-40C to +80C
Warranty	12 months Australian warranty

1 year warranty - in Australia
Ubiquiti Power Limits in Australia
Official Online Forum
Support Page for Drivers, Documentation, etc.
- The Knowledge Base provides a place where you can search the most commonly asked support and pre-sales technical support questions.
- The Support Wiki provides you with the AirOS user manual, quick setup guide, and setup tutorials to get your Ubiquiti™devices running.
- The Support Forum is an excellent and resourceful place to access the wealth of knowledge from Ubiquiti Support Engineers and the entire Ubiquiti™ Community.
- The Best Practices explains how Ubiquiti recommends setup for best performance.
Support is provided by the manufacturer. After checking the FAQ and online forums, if you still need help you can reach support in these ways:
- email: support@ubnt.com
- Phone: +1 408 942 1153
- Skype: Ubiquiti_Support

Click on the image to see the maximum POE cable lengths for various Ubiquiti devices and POE injectors

You may also want to add the following products to your purchase.

We recommend you do not use passive POE injectors (like the one shown) for Ubiquiti gear as these have no ESD/Surge protection.

15V. Recommended for most Ubiquiti™ products and applications with up to 40m of CAT5 cable.
18V. Recommended for CAT5 cable runs between 40 and 100 m.

This product was added to our catalog on Thursday 24 June, 2010.

Quantity: