|
Active Power over Ethernet (POE) is required where the ethernet cable (CAT5) is longer than 20m. Active POE uses a higher voltage on the CAT5 cable to reduce the DC current, and hence the resistive voltage loss in the cable. The unit includes Elecrostatic Discharge Protection (ESD) on the CAT5 data leads.
This Active POE Injector is suitable for use with:
- Any POE compatible device that needs appox. 24 VDC. (e.g. IP Cameras, some VoIP phones, ..)
- Ubiquiti™ Products.
Remote Factory Reset for Ubiquiti-M series Products
This POE injector has a Reset button that can be used with Ubiquiti-M series products to Reset to Factory defaults (10+ sec press). This is useful if you have a mast-mounted device that can not be contacted - e.g. forgotten IP address.
Typical Use
The usual use of the POE Set is shown in the diagram below. Note: All items in the diagram except the Injector are not included in this product.
Pinouts
| Pin | RJ45 Input | RJ45 Output
|
|---|
| Signal | Description | Signal | Description
|
|---|
| 1 | RX+ | Data Receive | RX+ | Data Receive
| | 2 | RX- | Data Receive | RX- | Data Receive
| | 3 | TX+ | Data Transmit | TX+ | Data Transmit
| | 4 | NC | No Connection | 24VDC + | DC Power +
| | 5
| | 6 | TX- | Data Transmit | TX- | Data Transmit
| | 7 | NC | No Connection | 24VDC - | DC Power -
| | 8
|
Power Over Ethernet Cable Lengths
Click image to enlarge
| Click on the image to see the maximum POE cable lengths for various Ubiquiti devices and POE injectors
|
802.3af Compatibility
This unit is NOT 802.3af compatible. It has an 24 VDC output. 802.3af specifes 48 VDC (typ.) output.
If you would like an active POE injector for 802.3af devices, please see our POE Active Injector - 48V.
What You Get
- Injector
- Australian AC Power cord
- 12 month warranty
Specifications
| Power over Ethernet
|
|---|
| AC Input | 90 ~ 260 VAC
| | DC Output | Voltage: 24 VDC
Current: 1000 mA (max.)
24 W (max.)
| | Temperature | Storage: -20 to +85 C
| | Operating: -10 to +60 C
| | Humidity | 5 to 90 %
| | Case | ABS Plastic
| | Dimensions | 86 x 56 x 33 mm
| | Colour | Black
| | Weight | 150 g
| | Approvals | CE, FCC, C-Tick
| | Surge Protection
|
|---|
| Pins protected | Data and Power
| | Protection mode | Common Mode
| | Clamping volatge | 11 V Data pins
77.5 V Power pins
| | Surge discharge | 36 A Data pins
1200 A Power pins
| | Shunt capactitance | < 5 pF on data pins
| | Response time | < 1 ns
|
Available Cable Options
You can order below with pre-made, outdoor rated CAT5 cables, complete with RJ45 connectors attached. One 20m cable comes with a PG9 cable gland to suit a 16mm hole in an enclosure.
|
