||Australian companies have the GST refunded by the ATO. The ex-GST price of this product is $170.29
Freenet Antennas is an authorised reseller of Ubiquiti products in Australia.
Ubiquiti products are carrier-class, meaning they are ideal for:
All Ubiquiti products include:
- Wireless ISPs (WISPs),
- Companies needing to deploy robust equipment with very powerful network management features, or
- End users needing top performance gear.
- An Operating System. For most products the OS is AirOS™ - Ubiquiti's powerful operating system and Graphic User Interface (GUI). For some of the embedded systems (boards) the OS is OpenWRT.
- Two Network modes that apply between the wired (ethernet) and wireless interfaces:
- Router - with common internet gateway features like NAT Firewall, PPPoE, etc.
- Bridge - transparent bridging.
- Four Wireless modes that apply to the radio interface:
- AP. Access Point mode is a standard 802.11 Access Point.
- Station. Sometimes called 'Client' mode, this connects to an AP.
- AP WDS. (AP + MULTI-POINT BRIDGE). This mode is the combination of an AP and a Multi-Point Bridge with up to 6 WDS
transparent bridge connections.
- Station WDS. (SINGLE POINT BRIDGE) This mode makes a transparent bridge connection to a unit in AP WDS mode as one of the 6 WDS peers.
- Advanced Featutres like:
- Wireless Traffic Shaping. Dedicated upstream and downstream bandwidth control.
- QoS. Wi-Fi Multimedia (WMM) Quality of Service prioritisation for Voice and Video.
We only supply World Version Ubiquiti units
In mid-2011 Ubiquiti started selling two models of every product with a radio:
Don't get USA-Locked products by mistake!
Freenet Antennas only sell World Version units.
- USA-Locked: This is what most USA suppliers sell - as required by the USA FCC.
These units can ONLY operate on US frequencies. We use different frequencies in Australia.
You can not change the 'Country' selection in the web interface. There is no way around this - even re-loading new firmware.
- World Version: These are only for sale outside USA and can use all legal frequency band available in Australia.
See our Product Selection Guides to help you decide which product is best for you.
Amazing Performance, with a Revolutionary Design
150 Mbps TCP/IP [?] and 10+ km Range
The NanoStationM2 packs some phenomenal performance with a revolutionary design combining a high-gain 4 antenna system, advanced radio architecture, and highly researched and developed firmware technology allowing throughput, stability, and capacity performance rivaling even the highest-end WiMax networks.
The NanoStationM2 has been proven in extreme temperature and weather conditions. Additionally, it has an advanced Electrostatic Discharge/Electomagnetic Pulse (ESD/EMP) immunity design to protect against common outdoor radio and ethernet failures.
The unit is a complete package of:
So that means:
- No radio card / host board issues
- No RF cable quality concerns
- No mechanical stability concerns
- No enclosure mounting requirement
- External signal strength LED meter for antenna alignment
- Integrated antennas
- Robust weatherproof design
- AirOS V5™ operating system that includes
- powerful network management
- gateway router or bridge functions, and
- full device control
|Operating band||2.4 GHz
|Transmit power||600 mW max.
|Receiver sensitivity||down to -96 dBm
|Antenna gain||10.4 to 11.2 dBi
|Processor Specs||Atheros MIPS 24KC, 400MHz
|Memory Information||32MB SDRAM, 8MB Flash
|Networking Interface||2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interfaces. One accepts POE voltages. The 2nd can optionally be used to power and connect a 2nd device that is compatible with the same POE voltages/pins as Ubiquiti devices.
|Approvals||FCC Part 15.247, IC RS210, CE, C-Tick
|Antenna||Integrated antenna array
|Power Supply||15V (12-24V) POE @ 8 Watts.|
Supply and injector included.
|Power Method||Passive Power over Ethernet (pairs 4,5+; 7,8 return)
|Operating Temperature||-30C to +80C (System PCB optimized for high-temp)
|Enclosure size||294 x 80 x 30 mm
|Mounting||Pole mount included. Optional Adjustable Wall/Window mount or NanoBracketM Adjustable Wall/Pole mount available.
|Warranty||12 months Australian warranty
Warranty and Support Information:
- 1 year warranty - in Australia
- Ubiquiti Power Limits in Australia
- Official Online Forum
- Support Page for Drivers, Documentation, etc.
- The Knowledge Base provides a place where you can search the most commonly asked support and pre-sales technical support questions.
- The Support Wiki provides you with the AirOS user manual, quick setup guide, and setup tutorials to get your Ubiquiti™devices running.
- The Support Forum is an excellent and resourceful place to access the wealth of knowledge from Ubiquiti Support Engineers and the entire Ubiquiti™ Community.
- The Best Practices explains how Ubiquiti recommends setup for best performance.
- Support is provided by the manufacturer. After checking the FAQ and online forums, if you still need help you can reach support in these ways:
Power Over Ethernet Cable Lengths
Click image to enlarge
|Click on the image to see the maximum POE cable lengths for various Ubiquiti devices and POE injectors
You may want to also consider...
You may also want to add the following products to your purchase.
Externally Rated CAT5 Cable
Grounding: It is imperative that this device is installed with a grounded POE cable. Failure to do so can result in the ethernet interface failing in an electrical (lightning) storm. Failure to provide proof that a suitable cable was used will result in any warranty claim being void.