|
|
| 
|
| 
| Australian companies have the GST refunded by the ATO. The ex-GST price of this product is $203.64
|
Freenet Antennas is an authorised reseller of Ubiquiti products in Australia.
Why Ubiquiti?
Ubiquiti products are carrier-class, meaning they are ideal for:
- Wireless ISPs (WISPs),
- Companies needing to deploy robust equipment with very powerful network management features, or
- End users needing top performance gear.
All Ubiquiti products include:
- An Operating System. For most products the OS is AirOS™ - Ubiquiti's powerful operating system and Graphic User Interface (GUI). For some of the embedded systems (boards) the OS is OpenWRT.
- Two Network modes that apply between the wired (ethernet) and wireless interfaces:
- Router - with common internet gateway features like NAT Firewall, PPPoE, etc.
- Bridge - transparent bridging.
- Four Wireless modes that apply to the radio interface:
- AP. Access Point mode is a standard 802.11 Access Point.
- Station. Sometimes called 'Client' mode, this connects to an AP.
- AP WDS. (AP + MULTI-POINT BRIDGE). This mode is the combination of an AP and a Multi-Point Bridge with up to 6 WDS
transparent bridge connections.
- Station WDS. (SINGLE POINT BRIDGE) This mode makes a transparent bridge connection to a unit in AP WDS mode as one of the 6 WDS peers.
- Advanced Featutres like:
- Wireless Traffic Shaping. Dedicated upstream and downstream bandwidth control.
- QoS. Wi-Fi Multimedia (WMM) Quality of Service prioritisation for Voice and Video.
See our Product Selection Guides to help you decide which product is best for you.
Amazing Performance, with a Revolutionary Design
 150 Mbps TCP/IP [?] and 10+ km Range
The NanoStationM5 packs some phenomenal performance with a revolutionary design combining a high-gain 4 antenna system, advanced radio architecture, and highly researched and developed firmware technology allowing throughput, stability, and capacity performance rivaling even the highest-end WiMax networks.
The NanoStationM5 has been proven in extreme temperature and weather conditions. Additionally, it has an advanced Electrostatic Discharge/Electomagnetic Pulse (ESD/EMP) immunity design to protect against common outdoor radio and ethernet failures.
The unit is a complete package of:
So that means:
- No radio card / host board issues
- No RF cable quality concerns
- No mechanical stability concerns
- No enclosure mounting requirement
Features
- External signal strength LED meter for antenna alignment
- Integrated antennas
- Robust weatherproof design
- AirOS V5™ operating system that includes
- powerful network management
- gateway router or bridge functions, and
- full device control
Specifications
| Transmit power | 500 mW max.
| | Receiver sensitivity | down to -96 dBm
| | Antenna gain | 14 to 16 dBi (4.9 to 5.9 GHz)
| | Wireless standards | 802.11a/n
| | OS | AirOS V5
| | Processor Specs | Atheros MIPS 24KC, 400MHz
| | Memory Information | 32MB SDRAM, 8MB Flash
| | Networking Interface | 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interfaces. One accepts POE voltages. The 2nd can optionally be used to power and connect a 2nd device that is compatible with the same POE voltages/pins as Ubiquiti devices.
| | Approvals | FCC Part 15.247, IC RS210, CE, C-Tick
| | RoHS Compliance | Yes
| | Antenna | Integrated antenna array
| | Power Supply | 15V (12-24V) POE @ 8 Watts.
Supply and injector included.
| | Power Method | Passive Power over Ethernet (pairs 4,5+; 7,8 return)
| | Operating Temperature | -30C to +80C (System PCB optimized for high-temp)
| | Weight | 0.4 kg
| | Enclosure size | 294 x 80 x 30 mm
| | Mounting | Pole mount included. Optional Adjustable Wall/Window mount or NanoBracketM Adjustable Wall/Pole mount available.
| | Warranty | 12 months Australian warranty
|
Warranty and Support Information:
- 1 year warranty - in Australia
- Ubiquiti Power Limits in Australia
- Official Online Forum
- Support Page for Drivers, Documentation, etc.
- The Knowledge Base provides a place where you can search the most commonly asked support and pre-sales technical support questions.
- The Support Wiki provides you with the AirOS user manual, quick setup guide, and setup tutorials to get your Ubiquiti™devices running.
- The Support Forum is an excellent and resourceful place to access the wealth of knowledge from Ubiquiti Support Engineers and the entire Ubiquiti™ Community.
- The Best Practices explains how Ubiquiti recommends setup for best performance.
- Support is provided by the manufacturer. After checking the FAQ and online forums, if you still need help you can reach support in these ways:
Power Over Ethernet Cable Lengths
Click image to enlarge
| Click on the image to see the maximum POE cable lengths for various Ubiquiti devices and POE injectors
|
You may want to also consider...
You may also want to add the following products to your purchase.
Externally Rated CAT5 Cable
Grounding: It is imperative that this device is installed with a grounded POE cable if mounted externally on a pole/mast. Failure to do so can result in the ethernet interface failing in an electrical (lightning) storm. Failure to provide proof that a suitable cable was used will result in any warranty claim being void.
Mounts
|
