Use this kit to upgrade your existing enclosure-based UltraWAP-G installation to use the Ubiquiti™ Bullet range of products. This kit is ideal if you have an UltraWAP-G located in one of these Freenet Antennas products.

• AP Enclosure V2
• 17 dBi Intenna as used in our best selling Point-to-Point product.

Advantages of Upgrading

• Powerful Network Management. All Bullet products can be monitored and controlled from the airControl™ network management console
• SNMP. By using Simple Network Management Protocol (SNMP) you integrate into the network management console of your choice.
• Better Performance over difficult links. The Bullet products have superior Receive Sensitivity compared to an UltraWAP and some models of Bullet have higher transmit power. So if you have a 'difficult' link that you would like to go faster, upgrading to Bullets will probably do that for you.

What You Get

• 1 x Bullet of your choice
  • Bullet2: 100mW, 54 Mbps connect speed.
  • Bullet2HP: 800mW, 54 Mbps connect speed.
  • BulletM2HP: 600mW, 150 Mbps connect speed.
• 1 x Custom Adapter Cable as shown in the picture below.
• 1 x small roll of Self Sealing Conforming tape (for the Bullet/Adapter cable connection)
• 1 x 15V Power Over Ethernet injector with Australian power cord.
• 1 x 20m Outdoor POE Cable. Not shown in picture below.

Click image to enlarge

20m POE cable not shown.

Typical Installation

Click image to enlarge