|
|
| 
|
| 
| Australian companies have the GST refunded by the ATO. The ex-GST price of this product is $140.91
|
Freenet Antennas is an authorised reseller of Ubiquiti products in Australia.
Why Ubiquiti?
Ubiquiti products are carrier-class, meaning they are ideal for:
- Wireless ISPs (WISPs),
- Companies needing to deploy robust equipment with very powerful network management features, or
- End users needing top performance gear.
All Ubiquiti products include:
- An Operating System. For most products the OS is AirOS™ - Ubiquiti's powerful operating system and Graphic User Interface (GUI). For some of the embedded systems (boards) the OS is OpenWRT.
- Two Network modes that apply between the wired (ethernet) and wireless interfaces:
- Router - with common internet gateway features like NAT Firewall, PPPoE, etc.
- Bridge - transparent bridging.
- Four Wireless modes that apply to the radio interface:
- AP. Access Point mode is a standard 802.11 Access Point.
- Station. Sometimes called 'Client' mode, this connects to an AP.
- AP WDS. (AP + MULTI-POINT BRIDGE). This mode is the combination of an AP and a Multi-Point Bridge with up to 6 WDS
transparent bridge connections.
- Station WDS. (SINGLE POINT BRIDGE) This mode makes a transparent bridge connection to a unit in AP WDS mode as one of the 6 WDS peers.
- Advanced Featutres like:
- Wireless Traffic Shaping. Dedicated upstream and downstream bandwidth control.
- QoS. Wi-Fi Multimedia (WMM) Quality of Service prioritisation for Voice and Video.
See our Product Selection Guides to help you decide which product is best for you.
2.4 and 5 GHz mini-PCI Radio Module
100Mbps+ TCP/IP DataRates
 100+ Mbps TCP/IP
The SR71-A is a Multi-In-Multi-Out (MIMO) card supporting:
- 2.4 GHz: 802.11b, 802.11g, 802.11n
- 5 GHz: 802.11a, 802.11n
These cards can be used in:
Specifications
| Operating frequency | 2.4GHz and 5 Ghz
| | Transmit power | 250 mW max.
| | Receive sensitivity | down to -97 dBm
| | Chipset | Atheros AR9160 with DFS SUPPORT
| | Radio Operation | IEEE 802.11a/b/g/n
| | Interface | 32-bit mini-PCI Type IIIA
| | Operation Voltage | 3.3VDC
| | Antenna Ports | 3 x MMCX for 3x3 MIMO operation
| | Temperature Range | -20C to +70C
| | Security | WPA, WPA2, AES-CCM & TKIP Encryption, 802.1x, 64/128/152bit WEP
| | Data Rates | up to 300Mbps
| | TX Channel Width Support | 20MHz / 40MHz
| | RoHS Compliance | Yes
| | Current Consumption | 1.35 A max.
| | Indoor Range (Antenna Dependent) | 150+m
| | Outdoor Range (Antenna Dependent) | 50+km
| | Operating System Support | Linux
|
Warranty and Support Information:
- 1 year warranty - in Australia
- Ubiquiti Power Limits in Australia
- Official Online Forum
- Support Page for Drivers, Documentation, etc.
- The Knowledge Base provides a place where you can search the most commonly asked support and pre-sales technical support questions.
- The Support Wiki provides you with the AirOS user manual, quick setup guide, and setup tutorials to get your Ubiquiti™devices running.
- The Support Forum is an excellent and resourceful place to access the wealth of knowledge from Ubiquiti Support Engineers and the entire Ubiquiti™ Community.
- The Best Practices explains how Ubiquiti recommends setup for best performance.
- Support is provided by the manufacturer. After checking the FAQ and online forums, if you still need help you can reach support in these ways:
You may want to also consider...
MMCX to rpSMA pigtail
- 200mm pigtail from MMCX connectors on this card to rpSMA(f)-male center, bulkhead mount
|
