Australian companies have the GST refunded by the ATO. The ex-GST price of this product is $68.18

Freenet Antennas is an authorised reseller of Ubiquiti products in Australia.

Why Ubiquiti?

• Wireless ISPs (WISPs),
• Companies needing to deploy robust equipment with very powerful network management features, or
• End users needing top performance gear.

• An Operating System. For most products the OS is AirOS™ - Ubiquiti's powerful operating system and Graphic User Interface (GUI). For some of the embedded systems (boards) the OS is OpenWRT.
• Two Network modes that apply between the wired (ethernet) and wireless interfaces:
  • Router - with common internet gateway features like NAT Firewall, PPPoE, etc.
  • Bridge - transparent bridging.
• Four Wireless modes that apply to the radio interface:
  • AP. Access Point mode is a standard 802.11 Access Point.
  • Station. Sometimes called 'Client' mode, this connects to an AP.
  • AP WDS. (AP + MULTI-POINT BRIDGE). This mode is the combination of an AP and a Multi-Point Bridge with up to 6 WDS transparent bridge connections.
  • Station WDS. (SINGLE POINT BRIDGE) This mode makes a transparent bridge connection to a unit in AP WDS mode as one of the 6 WDS peers.
• Advanced Featutres like:
  • Wireless Traffic Shaping. Dedicated upstream and downstream bandwidth control.
  • QoS. Wi-Fi Multimedia (WMM) Quality of Service prioritisation for Voice and Video.

Instantly Transform Any Antenna with a Bullet™

The Bullet™ screws straight onto an antenna. Click image to enlarge

No radio card / host board issues No antenna cable quality concerns No mechanical stability concerns No enclosure mounting requirement 25 Mbps TCP/IP

Features

• External signal strength LED meter for antenna alignment
• Low-loss integrated N-type RF connector
• Robust weatherproof design
• AirOS V3.4™ operating system that includes powerful network management, router or bridge functions, and full device control
• Integrated Gateway Router

Mesh Networking with Open-Mesh

Open-Mesh creates ultra low-cost, zero-config, plug & play wireless mesh network solutions that spread an Internet connection throughout a hotel, apartment, neighbourhood, village, coffee shop, shopping mall, campground, marina, or just about anywhere else you can imagine.

Using Open-Mesh, all the device configuration is done via the Open-Mesh.com server and your browser. That means you can remotely configure your mesh devices from anywhere in the world.

What can your Open-Mesh devices do?

• Build fault-tolerant meshes. One advantage of a mesh network is that they can be inherently tolerant of a broken link, so long as there is an alternate path between the end points. Non-redundant meshes are great for simple expansion of a network.
• Be standard APs - all meshed together. The devices automatically talk to each other and work out where the Internet connection is.
• Be Hotspots - stand-alone, or meshed together. You can make a single device hotspot (paid for use) or a captive portal (free use) for your customers. And you can expand this system by simply adding more units that join the main unit and extend the coverage. Great for Hotels/Motels.
• Cap user bandwidth - so there is enough bandwidth available for everyone.
• Have a custom-designed 'splash page' your users will see when they first browse. You get a complete WYSIWYG editor and have complete control over this page. You can also set a "redirect URL" that will take users to a page of your choosing once they click to enter.
• And more.

Specifications

Warranty and Support Information:

• 1 year warranty - in Australia
• Ubiquiti Power Limits in Australia
• Official Online Forum
• Support Page for Drivers, Documentation, etc.
  • The Knowledge Base provides a place where you can search the most commonly asked support and pre-sales technical support questions.
  • The Support Wiki provides you with the AirOS user manual, quick setup guide, and setup tutorials to get your Ubiquiti™devices running.
  • The Support Forum is an excellent and resourceful place to access the wealth of knowledge from Ubiquiti Support Engineers and the entire Ubiquiti™ Community.
  • The Best Practices explains how Ubiquiti recommends setup for best performance.
• Support is provided by the manufacturer. After checking the FAQ and online forums, if you still need help you can reach support in these ways:
  • email: support@ubnt.com
  • Phone: +1 408 942 1153
  • Skype: Ubiquiti_Support

Power Over Ethernet Cable Lengths

Click image to enlarge

Click on the image to see the maximum POE cable lengths for various Ubiquiti devices and POE injectors

You may also want to consider...

Externally Rated CAT5 Cables

• 20m
• 30m
• 40m

POE Injectors

We recommend you do not use passive POE injectors (like the one shown) for Ubiquiti gear as these have no ESD/Surge protection.

• 15V. Recommended for most Ubiquiti™ products and applications with up to 40m of CAT5 cable.
• 18V. Recommended for CAT5 cable runs between 40 and 100 m.