|
Active Power over Ethernet (POE) is required where the ethernet cable (CAT5) is longer than 20m. Active POE uses a higher voltage on the CAT5 cable to reduce the DC current, and hence the resistive voltage loss in the cable.
This Active POE Splitter is suitable for use with:
Typical Use
The usual use of the POE Set is shown in the diagram below. Note: All items in the diagram except the Splitter are not included in this product.
Pinouts
| Pin | RJ45 Input | RJ45 Output
|
|---|
| Signal | Description | Signal | Description
|
|---|
| 1 | RX+ | Data Receive | RX+ | Data Receive
| | 2 | RX- | Data Receive | RX- | Data Receive
| | 3 | TX+ | Data Transmit | TX+ | Data Transmit
| | 4 | 48VDC + | DC Power (+) | NC | No Connection
| | 5
| | 6 | TX- | Data Transmit | TX- | Data Transmit
| | 7 | 48VDC - | DC Power (-) | NC | No Connection
| | 8
| | DC Output
|
|---|
| Centre | 12 VDC +
| | Outside | Ground (0 VDC)
|
Specifications
| DC Input | 40 to 60 VDC
| | DC Output | Voltage: 12 VDC regulated
Current: 1 A (max.)
| | Temperature | Storage: -40 to +85 C
| | Operating: -25 to +60 C
| | Humidity | 5 to 90 %
| | Case | ABS Plastic
| | Colour | Grey
| | Dimensions | 85 x 76 x 36 mm
Including mounting flange
| | Isolation | 100 MOhms
1500 Vrms
| | Weight | 110 g
| | Approvals | CE, FCC, C-Tick, EN 55022
| | CAT5 cable length | 150 m (max)
| | DC Plug | Length: 12mm
OD: 5.5mm
ID: 2.1mm
Polarity: Inside (+), Outside (-)
| | DC Cable Length | 30 cm
| | Warranty | 12 months |
Available Cable Options
You can order below with pre-made, outdoor rated CAT5 cables, complete with RJ45 connectors attached. One 20m cable comes with a PG9 cable gland to suit a 16mm hole in an enclosure.
|
