Ubiquiti Common Controller - V4
Use keywords to find the product you are looking for.
Shipping & Returns
Conditions of Sale
BulletM5-HP 300mW 802.11a/n
Click to enlarge
Australian companies have the GST refunded by the ATO. The ex-GST price of this product is $134.92
is an authorised reseller of Ubiquiti products in Australia.
Ubiquiti products are
, meaning they are ideal for:
Wireless ISPs (WISPs),
Companies needing to deploy robust equipment with very powerful network management features, or
End users needing top performance gear.
All Ubiquiti products include:
An Operating System. For most products the OS is
- Ubiquiti's powerful operating system and Graphic User Interface (GUI). For some of the embedded systems (boards) the OS is
Two Network modes that apply between the wired (ethernet) and wireless interfaces:
- with common internet gateway features like NAT Firewall, PPPoE, etc.
- transparent bridging.
Four Wireless modes that apply to the radio interface:
. Access Point mode is a standard 802.11
. Sometimes called 'Client' mode, this connects to an AP.
. (AP + MULTI-POINT BRIDGE). This mode is the combination of an AP and a Multi-Point Bridge with up to 6 WDS transparent bridge connections.
. (SINGLE POINT BRIDGE) This mode makes a transparent bridge connection to a unit in
mode as one of the 6 WDS peers.
Advanced Featutres like:
Wireless Traffic Shaping
. Dedicated upstream and downstream bandwidth control.
. Wi-Fi Multimedia (WMM) Quality of Service prioritisation for Voice and Video.
We only supply World Version Ubiquiti units
Don't get USA-Locked products by mistake!
In mid-2011 Ubiquiti started selling two models of every product with a radio:
This is what most USA suppliers sell - as required by the USA
. These units can ONLY operate on US frequencies. We use different frequencies in Australia. You can not change the 'Country' selection in the web interface. There is no way around this - even re-loading new firmware.
: These are only for sale outside USA and can use all legal frequency band available in Australia.
Product Selection Guides
to help you decide which product is best for you.
2.4 GHz products
5 GHz products
Compared with Motorola Canopy
Instantly Transform Any Antenna with a Bullet™
The Bullet™ screws straight onto an antenna.
Click image to enlarge
No radio card / host board issues
No antenna cable quality concerns
No mechanical stability concerns
No enclosure mounting requirement
100 Mbps TCP/IP
External signal strength LED meter for antenna alignment
Low-loss integrated N-type antenna connector
Robust weatherproof design
operating system that includes
powerful network management
gateway router or bridge functions, and
full device control
Two modes of operation:
WiFi giving 802.11b/g/n compatibility, or
AirMax™ technology, which is a
technology giving robust network scalability needed for Wireless ISP installations.
- Ubiquiti's Revolutionary TDMA Protocol System
is Ubiquiti technology giving true Carrier Class Network Performance.
Scalability: 300+ subscribers per sectored base station
Latency: Latency remains low for voice and video applications as network scales
Speed: 150Mbps+ Point-to-Multipoint performance
Range: 50km+ outdoor range
300 mW max.
down to -96 dBm
Atheros MIPS 24KC, 400MHz
32MB SDRAM, 8MB Flash
1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
FCC Part 15.247, IC RS210, C-Tick
18V (12-24V) POE @ 4 Watts.
Supply and injector sold separately
Passive Power over Ethernet (pairs 4,5+; 7,8 return)
-40C to +80C
12 months Australian warranty
Warranty and Support Information:
1 year warranty - in Australia
Ubiquiti Power Limits in Australia
Official Online Forum
Support Page for Drivers, Documentation, etc.
provides a place where you can search the most commonly asked support and pre-sales technical support questions.
provides you with the AirOS user manual, quick setup guide, and setup tutorials to get your Ubiquiti™devices running.
is an excellent and resourceful place to access the wealth of knowledge from Ubiquiti Support Engineers and the entire Ubiquiti™ Community.
explains how Ubiquiti recommends setup for best performance.
Support is provided by the manufacturer. After checking the FAQ and online forums, if you still need help you can reach support in these ways:
Phone: +1 408 942 1153
Power Over Ethernet Cable Lengths
Click image to enlarge
Click on the image to see the maximum POE cable lengths for various Ubiquiti devices and POE injectors
You may want to also consider...
You may also want to add the following products to your purchase.
Externally Rated CAT5 Cable
It is imperative that this device is installed with a grounded POE cable. Failure to do so can result in the ethernet interface failing in an electrical (lightning) storm. Failure to provide proof that a suitable cable was used will result in any warranty claim being void.
Custom Length Grounded - Contact Us for a price.
20m (Not for external/pole use)
30m (Not for external/pole use)
40m (Not for external/pole use)
We recommend you do not use passive POE injectors (like the one shown) for Ubiquiti gear as these have no ESD/Surge protection.
. Recommended for most Ubiquiti™ products and applications with up to 40m of CAT5 cable.
. Recommended for CAT5 cable runs between 40 and 100 m.
For more information...
Please visit this product's
Customers who bought this product also purchased
08 dBi 5 GHz Omni - SISO
LocoM2 200mW 802.11b/g/n
03 dBi Ceiling
LocoM5 200mW 802.11 a/n
Adapter, N-female to rpSMA-female
POE Passive Injector
Notify me of updates to
BulletM5-HP 300mW 802.11a/n
Tell A Friend
Tell someone you know about this product.
Write a review on this product!
Tuesday 01 December, 2015
10318064 requests since Saturday 14 August, 2004