This all-metal enclosure has been custom made for Freenet Antennas. It is a premium quality enclosure suitable for commercial, industrial, and hobby installations. A free pole-mount kit is included.

It comes in two slightly different models and you can include an optional weatherproof Power over Ethernet (POE) cable.

The outdoor equipment is industrial-strength, with an IP rating of IP65.

It is suitable for these access points:

• Freenet Antennas UltraWAP
• Linksys Linksys WRT54GL (Model 1 only).

Two Models

Model 1 has a hole suitable for a PG7 cable gland - as used for CFD200 antenna cable.

Model 2 has a hole suitable for a Bulkhead Mount N-type Female connector.

Features

Feature	Model 1	Model 2
Antenna port	To suit PG7 cable gland (3~6.5 mm cable dia). Gland not supplied.	To suit N-type Female thread. Supplied with threaded blind plug to suit.
Antenna port options	1m Antenna cable, with integrated PG7 cable gland, rpSMA to N-male	N-Type female bulkhead pigtail with O-ring real and rpSMA connector. See photo below. (Other connectors on request)
Photos Click to enlarge	Exterior. Pole mount shown installed. Empty enclosure. Optional pigtail, and UltraWAP shown installed. Optional pigtail, and Linksys WRT54GL shown installed.	Optional N-female bulkhead pigtail, and UltraWAP shown installed. Exterior view showing the N-type female connector and PG9 cable gland.
POE port	Fitted with PG9 cable gland (4~8 mm cable dia.).
POE port option	20m Weatherproof POE cable with integrated PG9 cable gland.
Enclosure dimensions	Inside width: 182 mm Inside height: 182 mm Inside depth: 31mm in most areas, except 25 mm at PCB mounting points (9 places)
Construction	All metal. Housing: Die-cast with 'fins' for maximum cooling. Backplate: Aluminium.
Seal	Silicone 'O-Ring'
Pole mount	Included as shown. To suit pole dia. 25 to 60 mm.
International Protection Rating (Ingress Protection Rating)	IP65